Epson TM-T88V-DT User Manual page 29

TM-i firmware ver.4.0 or later
Use the following procedure for registration.



1
Start the setup computer.
2
Connect the TM-i to the network and turn the power ON.
3
Start the Web browser on the setup computer and enter as follows:
http://[IP address of the TM-i]/PrinterConfigurationPage/
For details about the IP address settings for TM-i, see
4
EPSON TMNet WebConfig starts.
Select [Web Service Settings] - [Direct Print].
5
The "Direct Print" screen appears.
Set the following items and click [Apply].
Item
Server Direct Print
ID
Password
URL
Server 1
Interval(s)
IP Address Settings
Select the [Enable].
Set ID for the server-side program to identify TM-i. This ID becomes
the user ID used for Digest access authentication. The set value
will also be passed as an ID parameter value for the form data
posted to the server.
Not required for the sample program.
Set your password used for Digest access authentication.
Not required for the sample program.
Specify the Test_print.php address of the Web server.
Example: http://[IP address of Web server]/Test_print.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval.
Chapter 2 Sample Program
(p.23).
Description
2
29