Epson TM-T88V-DT User Manual page 26

TM-i firmware ver.4.0 or later
Use the following procedure for registration.


1
Start the setup computer.
2
Connect all TM printers to the network and power on.
3
Start the Web browser on the setup computer and enter as follows:
http://[IP address of the TM-i]/PrinterConfigurationPage/
For details about the IP address settings for TM-i, see
4
EPSON TMNet WebConfig starts. Select [Web Service Settings] - [Printer].
5
The "Printer" screen appears.
Configure the following items, click [Add].
Item
Device ID
Model
IP Address
Retry Interval (ms)
6
The information of the registered device is displayed in "Registered printers".
Click [Test Print] to check if the registered printer operates properly.
26


Set the ID for the controlled printer. (Any character string)
Select the model for the controlled printer.
Set the printer IP address for each device ID.
Set the timeout retry interval.
Specify "100".
IP Address Settings (p.23).
Description
(p. 23)