Epson TM-T88V-DT User Manual page 57

TM-DT Settings
Configure the Status Notification settings using EPSON TMNet WebConfig.


Use the following procedure for registration.
1
Connect the TM-DT to the network and turn the power ON.
2
Start EPSON TMNet WebConfig from the shortcut on the desktop.
EPSON TMNet WebConfig starts.
If you are making settings from an external device, set the TM‐DT IP address in the
address for the Web browser. The default IP address for TM‐DT is 192.168.192.168.
http://[IP address of TM‐DT]/webconfig/
3
Select as [Settings]-[Web service settings]-[Status notification].
The "Status notification" screen appears.
Chapter 4 Status Notification
4
57