Table of Contents
Advertisement
First steps
Installing the base station
The base station is designed for use in
closed, dry rooms with a temperature range
of +5 °C to +45 °C.
Set up the base station at a central point in
your apartment or house.
Please note:
u
Never expose the telephone to heat
sources, direct sunlight or other electrical
appliances.
u
Protect your Gigaset from moisture, dust,
corrosive liquids and vapours.
Range and reception strength
Range:
u
Outdoors: up to 300 m
u
Indoors: up to 50 m
Connecting the base station
¤
First connect the power supply unit and
then the phone jack as shown below.
1
1 Power supply unit 220 V
2 Phone jack with phone cord
Please note:
u
The mains adapter must always be con-
nected, as the phone will not operate
without mains connection.
u
Only use the mains adapter and phone
cord supplied.
2
u
If you buy a replacement phone cord,
make sure that the phone jack has the
correct type of wiring.
Setting up the handset for use
Inserting the batteries
Warning:
Use only the rechargeable batteries recom-
mended by Gigaset Communicatins GmbH
Never use a conventional (non-rechargeable)
battery or other battery types as this could result
in significant health risks and personal injury. For
example, the batteries could explode. The phone
could also malfunction or be damaged as a result
of using batteries that are not of the recom-
mended type.
¤
Insert the batteries the right way round.
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
Put the cover on the phone as indicated on
the picture below. Push the cover upward
until click sound is heard, means the cover is
fixed properly.
First steps
7
Advertisement
Table of Contents
