Before You Begin; Product Features - Cisco SPA232D Administration Manual

Getting Started

Before You Begin

Before You Begin

Product Features

Cisco SPA232D Administration Guide
Before you begin the installation, make sure that you have the following equipment
and services:
• An active Internet account and Voice over IP account
• Ethernet cable to connect to your broadband network device
• Phone to connect to your ATA
• Phone cable to connect your phone
• Optional: Uninterruptible Power Supply (UPS) to provide backup power
• Optional: Cisco SPA302D Mobility Enhanced Cordless Handsets
Top Panel
Feature Description
Steady green—One or more handsets is
registered.
Fast flashing green—The base is in registration
mode. To activate registration mode, press the
Page/
button for at least 7 seconds.
Registration
Slow flashing green—The base is in paging mode
or a handset is off hook. To activate paging mode to
locate a handset, press the button for a few
seconds; handsets ring.
Off—No handset is registered to the base.
Steady green—The line is off hook and connected
to the local telephone system.
Slow flashing green—The line is off hook.
Off—The port is not ready.
LINE
Steady green—The device is on hook and
registered to a SIP proxy.
Slow flashing green—The device is off hook.
PHONE
Off—The port is not ready.
Flashing green—Transmitting or receiving data
through the WAN port.
Off—No link.
INTERNET
1
12