Cisco SPA232D Administration Manual page 59

Configuring the Voice Settings
Information
Cisco SPA232D Administration Guide
DECT 1 ~ DECT 10 Status
Field
Registration State
Last Registration
At
Next Registration
In
Message Waiting
Call Back Active
Last Called
Number
Last Caller
Number
Mapped SIP Port
Call 1 and 2 State
Call 1 and 2 Tone
Call 1 and 2
Encoder
Call 1 and 2
Decoder
Description
Indicates whether or not the line has registered with the
SIP proxy: Registered, Not Registered, or Failed.
The last date and time when the line was registered.
The number of seconds before the next registration
renewal.
Indicates whether or not there are new messages: yes or
no. The value automatically is set to yes when a message
is received. You also can clear or set the flag manually
from the User 1 page.
Indicates whether a call back request is in progress: yes
or no.
The phone number that was most recently called through
this port.
The originating phone number of the call that was most
recently received through this port.
Port number of the SIP port mapped by NAT.
The current call state:
• Idle
• Collecting PSTN Pin
• Invalid PSTN PIN
• PSTN Caller Accepted
• Connected to PSTN
The type of tone used by the call.
The codec used for encoding.
The codec used for decoding.
4
58