Cisco SPA232D Administration Manual page 163

Configuring the Voice Settings
DECT Line 1 - DECT Line 10
Cisco SPA232D Administration Guide
Field
Conference Bridge
URL
Voice Mail Number
Mailbox ID
Feature Key Sync
Proxy and Registration
Description
The ATA supports external conference bridging for n-way
conference calls (n>2), instead of mixing audio locally. To
use this feature, set the parameter <Conference Bridge
URL> to a specific bridge URL in the server. For example:
conf@myserver.com:12345 or conf (which uses the
Proxy value as the domain).
For a 3-way conference, select "conference" from soft key
options on the handset or hookflash for FXS. For n>3, add
participants by making new calls.
Default setting: blank
NOTE: To establish a conference bridge the ATA first
sends INVITE to the conference address and then REFER
the two calls to the same address. The conference server
then does external audio mix/relay on behalf of the 3
parties.
The phone number for the voice mail system.
Default setting: blank
Enter the ID number of the mailbox for this line.
Default setting: blank
Enables synchronization of DND and CFWD settings
between the ATA and the proxy server. (Any change in the
fields on the ATA is notified to the proxy and viceversa.)
The features are synchronized per line basis. The first
incoming DECT line (line with the lowest line number) of a
handset is used to notify DND setting changes with the
proxy server.
Default setting: No
4
162