Cisco SPA232D Administration Manual page 79

Configuring the Voice Settings
Provisioning
Cisco SPA232D Administration Guide
Field
Report Rule
Firmware Upgrade
Field
Upgrade Enable
Upgrade Error
Retry Delay
Description
The target URL to which configuration reports are sent.
This parameter has the same syntax as the Profile_Rule
parameter, and resolves to a TCP/IP command with an
associated URL.
A configuration report is generated in response to an
authenticated SIP NOTIFY message, with Event: report.
The report is an XML file containing the name and value of
all the device parameters.
This parameter may optionally contain an encryption key.
For example:
[ --key $K ] tftp://ps.callhome.net/$MA/rep.xml.enc
Default setting: blank
Description
Determines whether or not firmware upgrade operations
can occur independently of resync actions.
Default setting: yes
The upgrade retry interval (in seconds) applied in case of
upgrade failure. The ATA has a firmware upgrade error
timer that activates after a failed firmware upgrade
attempt. The timer is initialized with the value in this
parameter. The next firmware upgrade attempt occurs
when this timer counts down to zero.
Default setting: 3600 seconds
4
78