Cisco SPA232D Administration Manual page 78

Configuring the Voice Settings
Provisioning
Cisco SPA232D Administration Guide
Field
Resync Trigger 1
Resync Trigger 2
Resync Fails On
FNF
Profile Rule
Profile Rule B:
Profile Rule C:
Profile Rule D
Log Resync
Request Msg
Log Resync
Success Msg
Log Resync Failure
Msg
Description
Configurable resync trigger conditions. A resync is
triggered when the logic equation in these parameters
evaluates to TRUE.
Default setting: blank
Determines whether a file-not-found response from the
provisioning server constitutes a successful or a failed
resync. A failed resync activates the error resync timer.
Default setting: yes
This parameter is a profile script that evaluates to the
provisioning resync command. The command is a TCP/IP
operation and an associated URL. The TCP/IP operation
can be TFTP, HTTP, or HTTPS.
If the command is not specified, TFTP is assumed, and the
address of the TFTP server is obtained through DHCP
option 66. In the URL, either the IP address or the FQDN of
the server can be specified. The file name can have
macros, such as $MA, which expands to the ATA MAC
address.
Default setting: /spa$PSN.cfg
Defines second, third, and fourth resync commands and
associated profile URLs. These profile scripts are
executed sequentially after the primary Profile Rule
resync operation has completed. If a resync is triggered
and Profile Rule is blank, Profile Rule B, C, and D are still
evaluated and executed.
Default setting: blank
This parameter contains the message that is sent to the
Syslog server at the start of a resync attempt.
Default setting: $PN $MAC -- Requesting resync
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued upon successful completion of a
resync attempt.
Default setting: $PN $MAC -- Successful resync
$SCHEME://$SERVIP:$PORT$PATH
Syslog message issued after a failed resync attempt.
Default setting: $PN $MAC -- Resync failed: $ERR
4
77