Performing The Scan Color Consistency Procedure - Xerox VersaLink C405/N User Manual

To select a target job type for your calibration, touch Target, then select the type of output you
4.
want calibrated.
To optimize color only for copy jobs, touch Copy Jobs Only.
−
− To optimize color only for print jobs, touch Print Jobs Only.
To optimize color for both copy and print jobs, touch Copy & Print Jobs.
−
− If no adjustment is desired, touch None.
5. To select the source paper tray, touch Paper Supply, then touch the desired tray.
6. To begin the color calibration, touch Start. Follow the onscreen instructions.
7. When finished, touch Close.
To exit the menu, touch X.
8.
9. To return to the Home screen, press the Home button.

Performing the Scan Color Consistency Procedure

1. At the printer control panel, press the Home button.
2. Touch Device > Support > Color Scan Consistency.
To select the desired procedure, touch Calibration Type, then select your procedure.
3.
− To perform the Scan Color Consistency procedure, touch Print Calibration Chart. Follow the
onscreen instructions.
− To restore your color scan settings to the previous settings, touch Restore Previous Settings.
Follow the onscreen instructions.
− To reset your color scan settings to factory-default values, touch Reset to Factory Defaults.
Follow the onscreen instructions.
4. When finished, touch Close.
To exit the menu, touch X.
5.
6. When finished, to return to the Home screen, press the Home button.
Xerox VersaLink C405 Color Multifunction Printer
® ®
Maintenance
173
User Guide