Calibrating The Scanner - Plustek SmartOffice PL2546 User Manual

3. Install the new pad module by inserting the tabs on the module onto their slots
on the scanner.
4. Close the ADF cover by pushing it back down until it snaps back into place.
C
ALIBRATING THE
Attention
Calibrate the scanner if colors appear in areas that should be white, or colors of the
scanned image and the original vary a lot. This allows you to adjust and compensate
for variations that can occur in the optical component over time by its nature.
S
CANNER
Please uninstall the extended paper width
sliders before you start the calibration.
35