Plustek SmartOffice PL2546 User Manual page 33

Attention
Scan from the Scanner Buttons
1. Place the document or images onto the scanner. (Refer to "Chapter II.
Scanning" of this guide for more information in placing paper into the ADF or on
the flatbed glass properly.)
2. Check current button settings by viewing the memo label or the Button
Configuration window. If needed, you may also modify settings to meet your
current needs. (Refer to "View Button Settings" and "Configure Button Settings"
below for more information.)
3. Press the UP or DOWN button to select the desired task.
4. Press the Scan button.
The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Attention
Configure Button Settings
Within the "Button Configuration" window, you can find a row of icons running
through the left side of the window. Each icon represents a scanning task, and the
number underneath corresponds to the function number displayed on the scanner front
panel. Nine frequently-used scanning tasks are pre-configured for your convenience to
start scanning immediately. You may, however, customize the settings of every nine
tasks to best meet your needs and preferences. Follow the steps described below:
1. Do one of the following to open the Button Configuration window:
Double-click the icon
Right-click the icon
Button Configuration... in the pop-up menu that opens.
2. Select a task number by clicking on the icon at the left side of the window.
3. Select the desired function from the drop-down list of Button Template and
adjust button settings.
When you scan by the OCR button of
DocAction program, in each batch you can scan
up to either 50 sheets of paper for single-sided
scans or 25 sheets of paper for double-sided
scans because of the limit from ABBYY
FineReader 6.0 Sprint Plus.
Place only text documents for OCR purposes.
Do not scan a photo using the OCR button.
in the Windows system tray.
in the Windows system tray, and then choose
29