Plustek SmartOffice PL2546 User Manual page 41

1. From the Windows START menu, point to All Programs > Your Scanner
Model Name, and then click Scanner Utility.
2. In the Standby Mode section of the Scanner Utility window that opens, click the
button of your option:
a. To disable the Standby Mode: Click the button before Disable Standby
Mode.
b. To automatically enter the Standby Mode: Click the button before Enter
the Standby mode after the scanner has been idle for ... minutes and
then click the up or down arrows to set a default time for the scanner to
automatically enter the Standby Mode.
Information
3. Click on OK button to save settings and exit.
Warning
Alternatively you may click Default to restore the default settings. You may press
any scanner button to wake up the scanner from power saving.
The scanner will enter the standby mode (sleep
mode) after it is idle for 10 minutes. Simply press
any scanner button on the scanner panel and the
scanner will return back to the normal status.
To completely shut down the scanner, press
the power switch on the side of the scanner.
If the scanner will not be used for a long
period of time, shut down the scanner and
then disconnect the power cable from the
power outlet.
37