Placing Plastic Cards - Plustek SmartOffice PL2546 User Manual

2. Adjust the paper width slider to the business card width. The paper width
slider should be gently touching both sides of the business cards.
Attention
P P
LACING LASTIC
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medic-care card or any membership card. Make sure to load the embossed face
of the embossed card face down into the scanner.
1. Horizontally load the plastic card, headfirst and face down, toward the center
of the ADF.
For single-sided scans, load the card face down.
For double-sided scans, load the card in desired order.
2. Adjust the paper width slider to the card width. The paper width slider should
be gently touching both sides of the card.
Attention
Don't load more than 20 business cards in one
batch.
C
ARDS
Make sure the plastic cards you wish to
scan are horizontally loaded into the ADF.
Maximum thickness of each plastic card is
1.2 mm.
20