Table of Contents
Advertisement
P
P
LACING
LASTIC
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medic-care card or any membership card. Make sure to load the embossed face
of the embossed card face up into the scanner.
1. Horizontally load the plastic card, headfirst and face up, toward the center of
the ADF.
For single-sided scans, load the card face up.
For double-sided scans, load the card in desired order.
2. Adjust the paper width slider to the card width. The paper width slider should be
gently touching both sides of the card.
Attention
S
D
CANNING
There are 3 different ways to operate the scanner:
1. By scanning from the buttons on the scanner front panel.
2. By scanning from MacAction's Execute menu on the screen.
3. By scanning from the icon in the left side of the MacAction window.
The MacAction software is automatically installed to your system along with the
scanner driver.
Attention
C
ARDS
Make sure the plastic cards you wish to scan
are horizontally loaded into the ADF.
Maximum thickness of each plastic card is 1.2
mm.
OCUMENTS
Before you start scanning, check the following:
The power of both your computer and scanner
is turned on.
Paper is appropriately loaded into the ADF.
17
Advertisement
Table of Contents
