Placing Plastic Cards - Plustek PS3140U User Manual

P P
LACING LASTIC
The plastic card can be embossed credit card, driver license, ID card, insurance
card, medic-care card or any membership card. Make sure to load the embossed face
of the embossed card face up into the scanner.
1. Horizontally load the plastic card, headfirst and face up, toward the center of
the ADF.
For single-sided scans, load the card face up.
For double-sided scans, load the card in desired order.
2. Adjust the paper width slider to the card width. The paper width slider should be
gently touching both sides of the card.
Attention
C
ARDS
Make sure the plastic cards you wish to scan
are horizontally loaded into the ADF.
Maximum thickness of each plastic card is
1.2 mm.
25