Electrical Recommendations: 120 V And 240 V Treadmills; Obtaining Service - Precor 9.23 Owner's Manual

Electrical Recommendations:
120 V and 240 V Treadmills
Note: This is a recommendation only. NEC (National
Electric Code) guidelines or local region electric codes
must be followed.
CAUTION: Use the supplied and appropriate power
cord. Do not remove or otherwise bypass the 3-
prong plug with an adapter in order to use a non-
grounded outlet. Do not plug the treadmill into a
power transformer in an attempt to adjust the
voltage requirements. Failure to follow these
instructions might damage the unit and will void
the Precor Limited Warranty. If an appropriate cord
for your location was not included with your
treadmill, please contact your Precor dealer for the
proper Precor power cord. For more information on
authorized Precor dealers in your area, please
contact Customer Support at www.precor.com.
You should have received a power cable that meets your
local electrical code requirements along with the
equipment. Precor treadmills must be connected to a
dedicated individual branch circuit with a capacity of at
least 15 amps for 120 V or at least 10 amps if designed
for 240 V. If you need additional help with the power
connections contact your Precor authorized dealer.
Owner's Manual: Important Safety Instructions

Obtaining Service

You should not attempt to service the treadmill except for
maintenance tasks as described in this manual. The
treadmill does not contain any user-serviceable parts that
require lubrication. For information about product
operation or service, see the Precor web site at
www.precor.com.
For future reference, write the model, serial number, and
date of purchase for your unit in the space provided. The
serial number is printed on a label located on the front
panel, near the power cord. Refer to Figure 3.
Model #: _______ Serial #: ___________________
Date purchased: _________________________
Figure 3: Location of serial number
8