Lexus ES350 Service Manual page 58

58
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock function
belt)
Rear-facing  Infant seat/convertible seat
■
Place the child restraint system
1
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
2
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
3
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
While pushing the child restraint
4
system down into the rear seat,
allow the shoulder belt to retract
until the child restraint system is
securely in place.
After the shoulder belt has retracted
to a point where there is no slack in
the belt, pull the belt to check that it
cannot be extended.
ES350_OM_OM33B64U_(U)
I n f o r ma t i o n P r o v i d e d b y :