Lexus ES350 Service Manual page 214

Hide thumbs Also See for ES350:
Table of Contents

Advertisement

214
4-5. Using the driving support systems
Dynamic radar cruise control can be set when
The shift lever is in D or range 4 or higher of S has been selected.
Vehicle speed is above approximately 30 mph (50 km/h).
Accelerating after setting the vehicle speed
The vehicle can accelerate by operating the accelerator pedal. After accelerating, the
set speed resumes. However, during vehicle-to-vehicle distance control mode, the vehi-
cle speed may decrease below the set speed in order to maintain the distance to the pre-
ceding vehicle.
Automatic cancelation of vehicle-to-vehicle distance control mode
Vehicle-to-vehicle distance control mode is automatically canceled in the following situ-
ations. "Radar Cruise Control Unavailable" will be displayed on the multi-information
display:
Actual vehicle speed falls below approximately 25 mph (40 km/h).
VSC is activated.
TRAC is activated for a period of time.
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
The sensor cannot detect correctly because it is covered in some way.
Pre-collision braking is activated.
If vehicle-to-vehicle distance control mode is automatically canceled for any other rea-
son, there may be a malfunction in the system. Contact your Lexus dealer.
Automatic cancelation of constant speed control mode
Constant speed control mode is automatically canceled in the following situations:
Actual vehicle speed is more than approximately 10 mph (16 km/h) below the set vehi-
cle speed.
Actual vehicle speed falls below approximately 25 mph (40 km/h).
VSC is activated.
TRAC is activated for a period of time.
When the VSC or TRAC system is turned off by pressing the VSC OFF switch.
Pre-collision braking is activated.
If constant speed control mode is automatically canceled for any other reason, there may
be a malfunction in the system. Contact your Lexus dealer.
Warning messages and buzzers for dynamic radar cruise control
Warning messages and buzzers are used to indicate a system malfunction or to inform
the driver of the need for caution while driving. If a warning message is shown on the
multi-information display, read the message and follow the instructions.
ES350_OM_OM33B64U_(U)
I n f o r ma t i o n P r o v i d e d b y :

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents