Lexus ES350 Service Manual page 162

162
4-3. Operating the lights and wipers
Turning on the high beam headlights
With the headlights on, push the
1
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
Pull the lever toward you and release
2
it to flash the high beams once.
You can flash the high beams with the
headlights on or off.
AFS (Adaptive Front-lighting System) (if equipped)
AFS (Adaptive Front-lighting System) improves visibility at intersections and on
curves by automatically adjusting the lateral angle of the headlights according to
vehicle speed and the degree of the tire angle that are controlled by steering
input.
Operates at speed of 6 mph (10 km/h) or higher.
Deactivating AFS
■
Select "AFS" on
1
(P. 79)
Press the meter control switch.
2
Daytime running light system
■
To make your vehicle more visible to other drivers during daytime driving, the daytime
●
running lights turn on automatically whenever the engine is started and the parking
brake is released. (Illuminate brighter than the parking lights.) Daytime running lights
are not designed for use at night.
For the U.S.A.: Daytime running lights can be turned off by operating the switch.
Compared to turning on the headlights, the daytime running light system offers greater
●
durability and consumes less electricity, so it can help improve fuel economy.
Headlight control sensor
■
The sensor may not function properly if an
object is placed on the sensor, or anything that
blocks the sensor is affixed to the windshield.
Doing so interferes with the sensor detecting
the level of ambient light and may cause the
automatic headlight system to malfunction.
ES350_OM_OM33B64U_(U)
(settings display) of the multi-information display.
I n f o r ma t i o n P r o v i d e d b y :