Lexus ES350 Service Manual page 472

472
8-2. Steps to take in an emergency
Emergency towing procedure
Take out the towing eyelet. (P. 486)
1
Remove the eyelet cover using a flat-
2
head screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the hole
3
and tighten partially by hand.
Tighten down the towing eyelet
4
securely using a wheel nut wrench.
Securely attach cables or chains to the towing eyelet.
5
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
6
If the engine does not start, turn the engine switch to IGNITION ON mode
Shift the shift position to N and release the parking brake.
7
When the shift lever cannot be shifted: P. 498
ES350_OM_OM33B64U_(U)
I n f o r ma t i o n P r o v i d e d b y :