Lexus ES350 Service Manual page 187

Changing settings of the pre-collision system
Enabling/disabling the pre-collision system
■
The pre-collision system can be enabled/disabled on
multi-information display.
The system is automatically enabled each time the engine switch is turned to IGNI-
TION ON mode.
If the system is disabled, the PCS
warning light will turn on and a mes-
sage will be displayed on the multi-
information display.
Changing the pre-collision warning timing
■
The pre-collision warning timing can be changed on
multi-information display.
The operation timing setting is retained when the engine switch is turned off.
Far
1
The warning will begin to operate
earlier than with the default timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to operate
later than with the default timing.
ES350_OM_OM33B64U_(U)
4-5. Using the driving support systems
I n f o r ma t i o n P r o v i d e d b y :
187
(P. 78) of the
4
(P. 78) of the