Lexus ES350 Service Manual page 127

Linked mirror function when reversing
When the mirror select switch is in the L or R position, the outside rear view mir-
rors will automatically angle downwards when the vehicle is reversing in order to
give a better view of the ground.
To disable this function, move the mirror select switch to the neutral position
(between L and R).
Adjusting the mirror angle when the vehicle is reversing
■
With the shift lever in R, adjust the mirror angle at a desired position. The
adjusted angle will be memorized and the mirror will automatically tilt to the
memorized angle whenever the shift lever is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position
(angle adjusted with the shift lever in other than R). Therefore, if the normal posi-
tion is changed after adjustment, the tilt position will also change. When the normal
position is changed, readjust the angle in reversing.
Mirror angle can be adjusted when
■
The engine switch is in ACCESSORY or IGNITION ON mode.
When the mirrors are fogged up
■
The outside rear view mirrors can be cleared using the mirror defoggers. Turn on the
rear window defogger to also defog the outside rear view mirrors. (P. 368)
Automatic adjustment of the mirror angle
■
A desired mirror face angle can be entered to memory and recalled automatically by the
driving position memory. (P. 115)
Auto anti-glare function
■
When the anti-glare inside rear view mirror is set to automatic mode, the outside rear
view mirrors will activate in conjunction with the anti-glare inside rear view mirror to
reduce reflected light. (P. 124)
ES350_OM_OM33B64U_(U)
3-4. Adjusting the steering wheel and mirrors
I n f o r ma t i o n P r o v i d e d b y :
127
3