Conference Calls - Comdial 80245 User Manual

If the Party is Busy –
If enabled on your system you may press:
RECON – to retrieve the call
SOHVA – to break in to the call in progress and announce the call waiting
CAMP – to camp-on to that station
OVER – to join the conversation on the intercom call.
To Transfer a Call Without Screening –
1. Answer the call
2. Press TRNS/CNF
3. Dial the extension or
4. Use the DSS button for the extension
5. Press SPEAKER or hang up.
6. If the extension is busy, the call will camp-on to that extension and will be answered as
soon as the line is no longer in use.
If a transferred call is not answered in the specified period of time, it recalls to your phone. At this
time, you may press SEND to transfer it back to that extension, HOLD to place the call on hold at
your station or ANS to answer the call.

Conference Calls

Calls involving up to 5 parties total, in any combination of internal and external lines may be made
on your system. Always connect the outside lines before the internal lines.
To Use –
Make the first call, press TRNS/CNF, make the next call, press TRNS/CNF. Repeat until all parties
are included. Make sure to connect external parties first.
To Continue an Intercom call After Outside Lines Have Left the Conference –
Press the line button of the remaining party.
To Pick Up a Call on Hold and Return them to the Conference –
Press TRNS/CNF, then the line button and TRNS/CNF again.
To Disconnect from a Call Between You and Two Outside Lines –
Dial "#" and hang up.
To Rejoin –
Press one of the lighted line buttons.
Other Features of Your Comdial Digitech or DSU Telephone
Display Contrast Adjustment –
1. Press OPTIONS,
2. Press NEXT twice
3. Press DISP
4. Press LIGHT or DARK until desired level is achieved.
5. Press SPEAKER to save and end.
Page 6 of 15