Errors While Scanning; Symbology Parameter Defaults - Motorola Symbol DS3578 Product Reference Manual

10 - 2 Symbol DS3578 Digital Scanner Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Symbology Parameter Defaults

Table 10-1 lists the defaults for all symbologies parameters. There are two ways to change the default values:
•
Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
•
Download data through the device's serial port using SSI. Hexadecimal parameter numbers are shown in this
chapter below the parameter title, and options are shown in parenthesis beneath the accompanying bar
codes. See the Simple Serial Interface (SSI) Programmer's Guide for detailed instructions for changing
parameters using this method.
NOTE See
parameters.
Parameter Defaults
Table 10-1
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
UPC/EAN/JAN Supplemental Redundancy
UPC/EAN/JAN Supplemental AIM ID Format
Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Transmit UPC-E1 Check Digit
UPC-A Preamble
UPC-E Preamble
UPC-E1 Preamble
Appendix A, Standard Default Parameters
Parameter
Default Parameters on page
for all user preferences, hosts, and miscellaneous default
Default
Enable 10-7
Enable 10-7
Disable 10-8
Enable 10-8
Enable 10-9
Disable 10-9
Ignore 10-10
10-13
10 10-14
Combined 10-14
Enable 10-15
Enable 10-15
Enable 10-16
System Character 10-16
System Character 10-16
System Character 10-18
5-4.
Page
Number