Move Cursor - Motorola Symbol DS3578 Product Reference Manual

Setup Field(s) Definitions (Continued)
Table 12-2
Parameter
Move Cursor to Last
Occurrence of String and
Replace All
Skip to End
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value

Move Cursor

Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the Alphanumeric Keyboard on page
NOTE If there is no match when the rule is interpreted and the rule fails, the next rule is checked.
Move Cursor To Character
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan Move Cursor to Last Occurrence of String and
Replace All, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Keyboard. Scan the End of
string representing the character(s) (up to 10) to insert using the
Alphanumeric Keyboard. Scan
Scan Skip to End to move the cursor to the end of the data.
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. To
set these values use the prefix/suffix values in
7-20.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
12-93.
Advanced Data Formatting 12 - 31
Description
Alphanumeric
Message. Enter another alphanumeric
End of Message.
Table 7-4 on page
Move Cursor To Start
Page
12-32
12-32
12-33
12-35
12-35