Scanner(S) To Cradle Support; Modes Of Operation; Point-To-Point Communication; Multipoint-To-Point Communication - Motorola Symbol DS3578 Product Reference Manual

4 - 20 Symbol DS3578 Digital Scanner Product Reference Guide

Scanner(s) to Cradle Support

NOTE Customers who purchased STB3578 and/or FLB3578 cradles prior to February 1, 2010 (manufacturing
date) and plan to use them in radio communication mode with the DS3578 must download 123Scan
Chapter 11,

Modes of Operation

The charging cradle with radio supports two radio communication modes of operation, allowing the scanner to
communicate wirelessly:
•
Point-to-Point
•
Multipoint-to-Point.

Point-to-Point Communication

In Point-to-Point communication mode, the cradle allows one scanner to connect to it at a time. In this mode, the
scanner is paired to the cradle either by insertion into the cradle (if pairing on contacts is enabled,
scanning the PAIR bar code on the cradle. Communication can be locked, unlocked (default), or in a lock override
state (see Pairing Modes on page
maintenance interval bar code beginning on
To activate this mode of operation, scan Point-to-Point.

Multipoint-to-Point Communication

In Multipoint-to-Point communication mode, up to three scanners can be paired to one cradle.
To activate this mode, the first scanner connected to the cradle must scan the Multipoint-to-Point bar code. This
mode allows a parameter broadcast
needs to be programmed.
To select Point-to-Point or Multipoint-to-Point mode, scan the appropriate bar code.
123Scan2) and update the scanner to the latest firmware revision.
4-22). In locked mode, locking intervals must be set by scanning a connection
page 4-24.
(page 4-21) that clones all scanners paired to the cradle so only one scanner
Multipoint-to-Point Mode
*Point-to-Point Mode
2
(see
page 4-23), or by