9
Non-accessed EAN Deletion
Yon can delete EANs that had not been accessed for a certain period. You can program a period in the
PGM2 mode.
Follow the procedure shown below.
Non-accessed EAN deletion
1.
Select the X1/Z1 mode from the mode selection screen.
2.
Select "4 EAN DELETE".
3.
Select "1 READING" to take a report, or "2 DELETE" to delete non-accessed EANs.
4.
When you select "2 DELETE", select you want to delete all the non-accessed EANs (1 ALL DELETE)
or delete the non-accessed EANs individually (2 IND.DELETE).
It is recommended to take a report fi rst before executing deletion operation.
NOTE
■ Non-accessed EAN report
*1
EAN code
Description
*1 When you select "2 DELETE", "Z1" is printed instead of "X1".
*2 When you select "2 DELETE", the EAN data for periodic sales report is also deleted.
These lines are printed when there is any sales data
to be printed in periodic sales report. *
115
2