Table of Contents
Advertisement
■ Scanner
Procedure
■ Online
Procedure
■ Clerk key
Procedure
■ EFT
Procedure
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as "0", no RS-232 channel is assigned.
• BAUD RATE (Use the selective entry)
Transmission speed (baud rate)
19200 bps/9600 bps/4800 bps
• TYPE (Use the selective entry)
Selection of the scanner type
RS-CS CONTROL/RS-CD CONTROL
• DATA BITS (Use the selective entry)
Data bit: 7 bits/8 bits
• PARITY (Use the selective entry)
Parity bit: NON/ODD/EVEN
• STOP BIT (Use the selective entry)
Stop bit: 1 bit/2 bits
• ITF14 (Use the selective entry)
W LENGTH:
With length
W/O LENGTH: Without length
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as "0", no RS-232 channel is assigned.
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as "0", no RS-232 channel is assigned.
Program each item as follows:
• CHANNEL# (Use the numeric entry)
Channel number (0 through 4)
When you program as "0", no RS-232 channel is assigned.
180
Advertisement
Table of Contents
