Error Display - Clarion CZ100E Owner's Manual & Installation Manual

DISC Player
Problem
Disc cannot be
loaded.
Sound skips or is
noisy.
Sound is bad
directly after power
is turned on.

7. ERROR DISPLAY

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 3
ERROR 5
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory
are cleared.
16
Downloaded from Caradio-Manual.com Manuals
Cause
Another disc is already loaded.
There is a foreign matter already
in place.
Compact disc is dirty.
Compact disc is heavily scratched
or warped.
Water droplets may form on the
internal lens when the car is
parked in a humid place.
Cause
Disc is inserted incorrectly.
The disc format is not supported.
This is a failure of deck's mechanism. Consult your store of purchase.
Measure
Eject the disc before loading the new
one.
Eject the foreign matter forcibly.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with the power
on.
Measure
Eject the disc then reload it properly.
Try another disc.