Error Display - Clarion FX688A Owner's Manual

20. ERROR DISPLAY

Error Display
DEVICE ERROR
OVER CURRENT
NO BLUETOOTH AUDIO
Cause
The connected USB device is not supported.
An error occurred when controlling the USB device.
The device is connected via the USB Hub.
Over-current or data error is detected.
A2DP is not connected to the unit.
Measure
If the USB device is frozen, disconnect it, and reconnect it
again.
Connect a proper USB device.
Disconnect the USB device, and reconnect it again.
Disconnect the device, and reconnect directly to the USB con-
nector of this unit without using the USB Hub.
Turn off the ignition switch, disconnect the device, restart the
engine and reconnect it again. If the device is still not recog-
nized, try replacing with a different device.
Disconnect and reconnect the device to the unit.
35