Tools For Board Extension - Sony SRW-5000 Maintenance Manual

1-21. Tools for Board Extension

The five sets of extension tools as follows are used for
maintenance.
For Large Plug-in Board
Description: Extension board, EX-873
SONY part No.: A-8346-141-A
For Connector Panel
Use the following boards and support to extend the
connector panel.
For 124 pin relay
Description: Relay board, EX-951
SONY part No.: A-8347-716-A
For 100 pin relay
Description: Relay board, EX-952
SONY part No.: A-8347-717-A
For Connector panel
Description: Extension board, EX-950
SONY part No.: A-8347-715-A
For securing the connector panel
Description: Support
SONY part No.: 3-205-709-01
n
If the rubber feet of the VTR has been removed, insert a
connector panel into the lower notch of the support.
CN41
EX-951
EX-950
Support
1-46
CN42
EX-952
MB-964 board
For DR-508 Board
By replacing the flexible boards that are connected with
DR-508 board and reel motors boards with the extension
flexible boards, the maintenance operation can be easily
performed at the DR-508 board is opened state.
Description: Extension flexible board (FL-276)
SONY part No.: 1-677-293-21
Extension flexible boards (FL-267)
For Power Unit
When unplugging the power unit from the inside of the
unit, use this extension harness.
Connect this extension harness between the power unit and
MB-964 board.
Description: Extension harness (DC OUT)
SONY part No.: 1-960-985-11
Power unit
MB-964 board
DR-508 board
Harness
CN100
SRW-5000/5500