Tape Guide Replacement - Sony SRW-5000 Maintenance Manual

5-16. Tape Guide Replacement

Replace the each tape guide with the unit of parts shown in the following List of
Tape Guide.
Note
When replacing the tape guide, use extreme care no to damage the drum.
Preparation
1. Turn the power off and disconnect the power cord.
2. Remove the upper lid (front) assembly. (Refer to Section 1-3-1.)
3. Remove the cassette compartment. (Refer to Section 1-5.)
List of Tape Guide
Name Parts to be replaced
TG-0 S plate assembly
TG-1 S tension regulator assembly
TG-2 TG-2 assembly
TG-3 TG-3 assembly
TG-4 TG-4 assembly
TG-5 Ring assembly
TG-6 Pinch arm assembly
TG-7 Ring assembly
TG-8 T tension regulator assembly
TG-9 Ring assembly
TG-10 T drawer assembly
Slant guide
For the exploded views, refer to the maintenance manual volume 2.
5-56
Method
Refer to Section 5-16-1.
Refer to Section 5-19.
Refer to the Exploded views.
Refer to the Exploded views.
Refer to the Exploded views.
Refer to Section 5-18.
Refer to Section 5-8.
Refer to Section 5-18.
Refer to Section 5-20.
Refer to Section 5-18.
Refer to Section 5-21.
Adjustment after replacement
Refer to "Adjustment after Replacement" in Section 5-16-1.
Refer to "Adjustment after Replacement" in Section 5-19.
Refer to Sections 6-2 to 6-12.
Refer to "Adjustment after Replacement" in Section 5-18.
Refer to "Adjustment after Replacement" in Section 5-8.
Refer to "Adjustment after Replacement" in Section 5-18.
Refer to "Adjustment after Replacement" in Section 5-20.
Refer to "Adjustment after Replacement" in Section 5-18.
Refer to "Adjustment after Replacement" in Section 5-21.
SRW-5000/5500