Board/Cp-376A Board - Sony SRW-5000 Maintenance Manual

5-30-3. CP-376 Board/CP-376A Board
Replacement
1. Turn the power off and disconnect the power
cord.
2. Remove the connector panel assembly.
(Refer to Section 1-4.)
3. Remove all the screws fixing the XLR
connectors (12 pcs).
4. Remove the CP-376/CP-376A board by
disconnect the connector from the CP-377
board.
5. Perform the installation in the reverse order
from steps 2 to 4.
n
The screws fixing the XLR connectors are
two kinds.
Use the longer screws (BVTT3 x 10) for
fixing the double-type connector.
Steps after Replacement
6. Check the output level of each analog audio.
(Refer to Section 1-25-5.)
5-106
BVTP3 x 10
BVTP3 x 10
BVTT3 x 6
BVTT3 x 6
CP-377 board
Connector panel
assembly
Remove the CP-376/CP-376A Board
CP-376 board
Connector
SRW-5000/5500