Sony HDW-F500 Maintenance Manual page 190

4-4. Alternative Maintenance Menu
4-4-3. RF SYSTEM Adjustment
2. Manual adjustment
(1) Press [F5] key from RF CHECK menu to enter to
ADV EQUALZE menu.
(2) Press [F2] (manual/auto switching) key to select
"manual". (When entered to a menu, "auto" is
selected as default.) GAIN A-CH data is underlined.
(The underlined data is the data being adjusted.)
(3) Use , , and
to the channel that you want to adjust.
(4) Use [+] and [_] keys in combination with [SFT] key
to change the data :
Press [+] key.
Press [_] key.
Press [+] key while pressing [SFT] key. :
Press [_] key while pressing [SFT] key. :
(5) Repeat steps (3) and (4) above on other channels.
(6) To save the adjustment data to NVRAM, execute [F1]
NVRAM CTL command.
(7) Press [F10] (EXIT) key to return to RF ADJUST
menu.
n
During manual adjustment, keys such as PLAY located on
the front panel are valid and you can perform any VTR
operation by these keys.
[F6] (CNF EQULZR) Key:
[F7] (ADV LEVEL) Key:
[F8] (CNF LEVEL) Key:
[F9] (REC CURRENT) Key:
Adjustment procedures of playback system [F6] CNF
EQULZR, [F7] ADV LEVEL and [F8] CNF LEVEL are
the same with those of [F5] ADV EQULZR.
Adjustment procedure of recording system ([F9] REC
CURRENT) is the same with that of [F5] ADV EQULZR
excluding a recording tape is required in place of the
alignment tape HR5-1A.
4-74
keys to move the underline
: The data increases by + 1.
: The data decreases by _ 1.
The data increases by + 4.
The data decreases by _ 4.
HDW-F500E MMP1