Extron electronics FOX T USW 203 User Manual page 40

VGA Video Adjustment panel
The
VGA Video Adjustment
parameters on the analog input: horizontal start, pixel phase, and total pixels.
Figure 24. VGA Video Adjustment Panel
Horizontal Start — Defines the number of pixels in the blanking area to the left of the
active area.
In the
Horizontal Start
arrows, or click and drag the slider to adjust the setting to the desired value. The field
Right
to the right of a slider shows the current value for the associated setting.
NOTE: The value for Horizontal Start can range between 0 and 255.
Default setting: .
128
Pixel Phase — Controls the pixel phase. Sampling at the optimum pixel phase results in a
bright, stable output.
In the panel of the
Pixel Phase
arrows, or click and drag the slider to adjust the setting to the desired value. The field to the
right of a slider shows the current value for the associated setting.
NOTE: The value for Pixel Phase can range between 0 and 63. Default setting:
The total pixels setting (see below) must be correctly set before adjusting pixel phase.
Total Pixels — Controls the total number of pixels in an active window.
In the panel of the
Shift VGA Video Adjustment
or click and drag the slider to adjust the setting to the desired value. The field to the right of
a slider shows the current value for the associated setting.
NOTE: The Total Pixels setting depends on the input rate. It is ±255 of the default value.
FOX T USW 203 Universal Switcher • FOX Extenders Control Program
panel of the tab adjusts the following video
Control
panel of the
VGA Video Adjustment
VGA Video Adjustment
panel, click the
panel, click the
Left
panel, click the or
Left Right
.
32
or arrows,
Left Right
or
32