Am/Fm Radio - Subaru 2016 Outback Owner's Manual

5-28
Audio/Audio set
& AM/FM radio
! Control screen and audio panel
No. Function
&
Select to display the audio source
1
selection screen.
&
Select to change the band.
2
The HD Radio indicator on the top
&
right of the screen changes accord-
3
ing to the reception condition of HD
Radio (if equipped).
Select to display a station list (if
&
equipped). Refer to "Selecting a
4
station from the list" F5-29.
No. Function
Select to scan radio channels.
This function enables searching for
receivable stations automatically,
and tunes in to a frequency for 5
&
seconds if a station is found. When
5
the 5-second period has elapsed, the
system searches for the next recei-
vable station again, and tunes in to
the frequency for 5 seconds.
Select to open the "Option" screen.
&
6
Refer to "Radio settings" F5-30.
When you touch a key, the system
tunes to the stored frequency.
&
When you touch and hold a key, the
7
system stores the frequency to the
selected preset channel. Refer to
"Presetting a station" F5-29.
No. Function
Turn to adjust volume.
&
Press to turn the audio system on/
8
off.
Turn to step up/down frequencies.
Turn to move up/down the list. Also,
the knob can be used to enter
&
selections on the list screens by
9
pressing.
Press to select an audio mode. For
details, refer to "Selecting an audio
source" F5-18.
Press to display the sound setting
&
screen. Refer to "Unit settings" F5-
10
19.
&
Press to seek for a station/channel.
11
Press and hold for continuous seek.
NOTE
. Although FM is normally static free,
reception can be affected by the sur-
rounding area, atmospheric conditions,
station strength and transmitter dis-
tance. Buildings or other obstructions
may cause momentary static, flutter or
station interference. If reception con-
tinues to be unsatisfactory, switch to a
stronger station.
. The radio automatically changes to
stereo reception when a stereo broad-
cast is received.