Fm/Am Radio Operation; Fm/Am Selection; Tuning - Subaru FORESTER Manual

5-10
Audio

FM/AM radio operation

& FM/AM selection
Push the "FM AM" button when the radio
is off to turn on the radio.
Push the "FM AM" button when the radio
is on to select FM1, FM2, FM3 or AM
reception.
Each brief press of the "FM AM" button
changes the radio in the following se-
quence starting from the last radio band
with you selected.
& Tuning
! Manual tuning
Turn the TUNE dial clockwise to increase
the tuning frequency and turn the "TUNE"
dial counterclockwise to decrease it.
Every time the dial is turned, the fre-
quency interval is changed 9 kHz (10
kHz*) in the MW mode, 3 kHz in the LW
mode and 0.05 MHz in the FM mode.
*: For type C audio: The tuning frequency
interval can be set to either 9 kHz or 10 kHz to
suit the broadcasting area. Refer to "Tuning
frequency interval change function for AM
waveband (type C audio)".
! Tuning frequency interval change
function for AM waveband (type C
audio)
Select the tuning frequency interval (9 kHz
or 10 kHz) that is appropriate for the
broadcasting area where the radio is
used. To select an interval of 9 kHz, press
the "1" preset button for 3 seconds while
pressing the "AM" button. The display will
show "9 kHz STEP".
To select an interval of 10 kHz, press the
"2" preset button for 3 seconds while
pressing the "AM" button. The display will
show "10 kHz STEP".
! Stereo indicator
The stereo indicator "ST" will illuminate
when an FM stereo broadcast is received.