To Set Cruise Control - Subaru 2016 Outback Owner's Manual

7-50
Starting and operating/Cruise control
& To set cruise control
Cruise control main button
1. Press the cruise control main button.
Cruise control indicator
The cruise control indicator on the combi-
nation meter will appear.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the "RES/SET" switch to the
"SET" side and release it. Then release
the accelerator pedal.
Cruise control set indicator
1) When setting the displayed unit as
"MPH".
2) When setting the displayed unit as
"km/h".
At this time, the cruise control set indicator
appears in the combination meter. The set
speed will be shown on the combination
meter. You can change the displayed unit
by operating the multi information display.
For details, refer to "Units" F3-41.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and