Starting And Operating; Starting And Stopping Engine; Safety Precautions; Operating Range For Push-Button Start System - Subaru 2016 Outback Owner's Manual

7-12
Starting and operating/Starting and stopping engine (models with push–button start system)
4. Turn the ignition switch to the "ON"
position while turning the steering wheel
left and right.
5. Check the operation of the warning
and indicator lights.
6. Turn the ignition switch to the "START"
position without depressing the accelera-
tor pedal.
7. Release the key immediately after the
engine has started.
If you cannot start the engine, there may
be a malfunction in the steering lock
function. Immediately contact your nearest
SUBARU dealer.
! CVT models
1. Check that the parking brake is ap-
plied.
2. Turn off unnecessary lights and ac-
cessories.
3. Check that the select lever is set in the
"P" position.
4. Depress the brake pedal and keep it.
5. Turn the ignition switch to the "ON"
position while turning the steering wheel
left and right.
6. Check the operation of the warning
and indicator lights.
7. Turn the ignition switch to the "START"
position without depressing the accelera-
tor pedal.
8. Release the key immediately after the
engine has started.
If you cannot start the engine, there may
be a malfunction in the steering lock
function. Immediately contact your nearest
SUBARU dealer.

Starting and stopping engine

(models with push-button
start system)
& Safety precautions
Refer to "Safety precautions" F2-10.
& Operating range for push-
button start system
Refer to "Operating range for push-button
start system" F3-5.
& Starting engine
WARNING
. There are some general precau-
tions when starting the engine.
Carefully read the precautions
described in "General precau-
tions when starting engine" F7-
9.
. If the indicator on the push-
button ignition switch flashes in
green after the engine has
started, never drive the vehicle.
The steering is still locked, and it
may result in an accident.