Subaru 2016 Outback Owner's Manual page 35

Hide thumbs Also See for 2016 Outback:
Table of Contents

Advertisement

1-6
Seat, seatbelt and SRS airbags/Front seats
! Memory function (driver's seat — if
equipped)
WARNING
. Never adjust the seat while driv-
ing to avoid loss of vehicle con-
trol and personal injury.
. Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechan-
ism.
. Never retrieve the seat position
while driving to avoid loss of
vehicle control and personal in-
jury.
. Perform the seat position retrie-
val before driving. Be sure to
confirm that the select lever is
in the "P" position, and the
parking brake is applied, when
adjusting the seat position. Do
not drive until the retrieval of the
seat position is complete.
. When retrieving a registered seat
position, make sure the hands,
feet and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
. When any unusual conditions or
malfunctions occur during the
retrieval of the seat position, stop
the retrieval of the seat position
by performing any of the follow-
ing procedures.
– Operate any of the power seat
switches
– Press the "SET" button
– Press button "1" or "2"
Some of your desired seat positions can
be registered. Register the seat position
with button "1" or "2" or each of the access
keys and retrieve the seat position.
The following seat positions can be
registered.
. Forward/backward position of the seat
. Angle of seatback
. Angle of seat cushion
. Height of seat
! Registration of seat position with
button "1" or "2"
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The select lever is in the "P" posi-
tion.
2. While pressing the "SET" button, press
and hold the desired button "1" or "2".
A chirp sounds once, and the seat position
is registered.
! Registration of seat position with
each access key
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
. The ignition switch is in the "LOCK"/
"OFF" position.
. The select lever is in the "P" posi-
tion.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2016 legacy

Table of Contents