Omron CJ2 User Manual page 109

Application
CX-Programmer
Programming
SwitchBox Utility
CX-Integrator
Network settings
Network Configurator
CX-FLnet
Touch-panel screen
CX-Designer
creation
Protocol macro cre-
CX-Protocol
ation
Simulation CX-Simulator
CX-Position
CX-Motion-NCF
Motion Control
CX-Motion-MCH
CX-Motion
Servo/Inverter set-
CX-Drive
tings
CX-Process Tool
PLC-based process
control
Face Plate Auto-
Builder for NS
Temperature control
CX-Thermo
settings
CJ2 CPU Unit Hardware User's Manual
CX-One Software
Basic software for creating and debugging PLC programs.
Utility software to support PLC debugging operations.
Software for starting and setting FA networks, such as Controller Link,
DeviceNet, CompoWay/F, Ethernet, and CompoNet. Includes routing
table components, data link components, and DeviceNet Configurator
functions.
Software for setting tag data links for the built-in EtherNet/IP port.
Software for making FL-net Unit system settings and performing moni-
toring.
Software for creating screen data for touch panel NS-series PTs.
Software for creating protocols (protocol macros) for exchanging data
with general-purpose external devices connected to Serial Communica-
tions Boards/Units and Option Boards.
Software for simulating PLC operations on a personal computer and
debugging programs without requiring a CPU Unit.
Software for creating and monitoring data for Position Control Units.
Software for creating and monitoring data for Position Control Units
(MECHATROLINK communications models).
Software for creating data for Motion Control Units (MECHATROLINK
communications models), and for creating and monitoring motion pro-
grams.
Software for creating data for Motion Control Units, and for creating and
monitoring motion programs.
Software for setting and adjusting Inverter and servo data.
Software for creating and debugging function blocks for Loop Controllers
(Loop Control Units/Boards, Process CPU Units, and Loop CPU Units).
Software for automatic generation of screen data (project files) for touch
panel NS-series PTs from Loop Controller function block tag informa-
tion.
Software for setting and adjusting Temperature Controller parameters.
4 Support Software
Description
4
4-3