Connecting By Ethernet - Omron CJ2 User Manual

4 Support Software
4-2-3

Connecting by Ethernet

Connection Method
Use commercially available Ethernet 100Base-TX STP twisted-pair cable (straight) to connect the CX-
One Support Software (e.g., CX-Programmer) to the built-in EtherNet/IP port through the switching hub.
100Base-TX
twisted-pair cable
(straight)
Connecting Cable
Use the following cable to connect the CJ2 CPU Unit to the computer running the Support Software.
Port at Unit
Built-in Ether-
Net/IP port
*1 Use 100Base-TX when using tag data links.
*2 The following table shows the devices recommended for use with the built-in EtherNet/IP port.
Part
Switching Hub
Twisted-pair cable
Connectors
(Modular plug)
Boots
4-10
CX-One (e.g., CX-Programmer)
Switching hub
Network type
Port at
(communications
computer
mode)
Ethernet 100Base-TX or
port *1
10Base-T
Manufacturer
Cisco Systems, Inc.
Contec USA, Inc.
Phoenix Contact
100Base-TX
Fujikura
EtherNet/IP compliant cable
STP Plug
Panduit Corporation
Tsuko Company
Built-in EtherNet/IP port
CJ2 CPU Unit
100Base-TX
twisted-pair cable
(straight)
Model
Commercially available
*2
twisted-pair cable
Commercially available
*2, *3
switching hub
Model number
Consult the manufacturer.
Consult the manufacturer.
Consult the manufacturer.
×
F-LINK-E 0.5mm 4P
MPS588
MK boot (IV) LV
CJ2 CPU Unit Hardware User's Manual
Length Remarks
100 m (Recom- ---
mended
between hub
and nodes.)
---
Inquires
Cisco Systems, Inc. Main
Corporate HQ
CONTEC USA Inc.
Phoenix Contact USA
Customer Service
Fujikura America, Inc.
---
Panduit Corporation US
Headquarters
Tsuko Company Japan
Headquarters