Harman Stove Company Accentra Owner's Manual page 3

Cast iron pellet stove
Table of Contents

Advertisement

The Accentra Pellet Heater
This heating appliance does not just have
automatic ignition, it has total automatic
temperature control.
The Accentra has an input heat range from
0 to 40,000 BTU's.
The Advance feed system has a maximum
feed rate of 5 lbs. per hour and a minumum
(maintenance) feed rate of .75 lbs. per hour and
then "off" if necessary.
The hopper holds approximately 50 pounds
of fuel.
The unit has an easy to clean combustion
system with an ash pan that holds ash from 1 ton
of burned premium pellets.
The control is designed for easy and
efficient operation. It has 2 automatic modes of
operation and 2 manual modes of operation.
INTRODUCTION
The Accentra uses a small room sensor
rather then a wall thermostat for a more accurate
temperature control.
This unit is equipped with several different
safety devices which will be explained later in this
manual.
With its specially designed burn pot and
the "Advance Ignitor" Automatic Ignition System,
the unit can burn a large variety of biomass fuels
with varying ash content.
The accordian style cast iron heat
exchanger system allows maximum surface area
for the most efficient heat transfer in a smaller
firebox.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents