Table of Contents
Advertisement
• Status messages
Message
Connecting
Download Success
Downloading
File Operating
Network Setup
Panel Locked
Panel Unlocked
Scene Recalling
Scene Storing
Cannot Recall
Cannot Store
NO X-OVER
NO LIMITER
Protected
Panel Protected
NO ROUTING
NO LEVEL
Network Busy
Synchronizing
Scene Deleting
* Do NOT turn off the power to the SP2060 while the unit displays the message "DO NOT TURN OFF!" at the bottom of the
display.
Meaning
Connecting to the network.
The program has been successfully updated.
Program update in progress. Do NOT turn power off while the unit displays this message.
A file operation is in progress during which the computer manipulates scene data. Do NOT turn power off
while the unit displays this message.
Preparing network connection.
The User Lock function is engaged. The panel controls do not work.
The User Lock function has been disengaged. Panel operation is now possible.
Scene recall in progress.
Scene store in progress. Do NOT turn power off while the unit displays this message.
Recalling scenes or libraries is disabled.
The scene store is disabled.
Input channels do not feature the X-Over parameter.
Input channels do not feature the Limiter parameter.
You cannot edit or delete protected scenes.
If the User Lock function is turned on, you cannot change the parameters by using the panel controls.
Input channel SUM does not feature the Routing parameter.
Input channel SUM does not feature the Level parameter.
There is too much network traffic. Communication is very slow.
Data is being received from the computer. Do NOT turn power off while the unit displays this message.
Deleting a scene. Do NOT turn power off while the unit displays this message.
SP2060
73
Advertisement
Table of Contents
