Table of Contents
Advertisement
SP2060
I
INITIALIZING
Follow the steps below to initialize the internal memory:
You can select one of the following initialization types:
LCD display
CURRENT BACKUP
To initialize the backup current scene.
Return the user settings except library to the factory set
WITHOUT LIB.
up.
FACTORY SETUP
Return the setting to the factory set up.
Caution
The data of the scene number and current scene are backed up by the battery. [SRAM (CPU circuit board: IC009)]
When the internal memory is initialized, the data stored in the memory will be lost.
Before initializing, save the data to an external device (such as a computer) with the backup function of the DME Designer.
For more information on the operation, refer to the DME Designer owner's manual.
Use caution when you execute this function.
1. Turn off the power to the SP2060.
2. Turn on the power to the SP2060 while pressing the [BACK/STORE] key.
Keep pressing the [BACK/STORE] key until the initialization display appears.
3. Press the [INC]/[DEC] keys to select a type of initialization.
Note
To cancel the initialization operation, select "Exit" and confirm the cancellation.
Alternatively, simply turn off the power to the SP2060.
4. Press the [NEXT] key to move the cursor to the
The following message appears.
5. Press the [INC/YES] key to start initialization operation.
During initialization, the following message appears.
When you press the [DEC/NO], initialization is canceled.
6. When initialization is completed, the SP2060 displays the following message, then automatically restarts.
68
Purpose
INITIALIZE
CURRENT BACKUP
icon, then press the [INC/YES] key.
INITIALIZE
ARE YOU SURE?
Executing..
Completed!
[BACK/STORE] [ INC/YES]
[DEC/NO] [NEXT/RECALL]
Scene
Configuration
Library
Component
Utility
Current Scene Number
Do nothing
Do nothing
Do nothing
Initialize
Initialize
Initialize
Current scene
Erase
Erase
Erase
[POWER]
Advertisement
Table of Contents
