Installation Wizard Screen - D-Link DCS-6220G User Manual

DCS-660G User's Manual
After you click "Yes" to the
certificate for authentication, you
should see an image from your
DCS-6620G 80.11g PTZ Internet
Camera.
You have now completed the Setup Wizard and are ready to use your camera! You can also continue
to the section titled "Installing IP surveillance Software" (page 22) to install the IP surveillance
software before you begin to use the DCS-6620G.

Installation Wizard Screen

The following options are available on the Installation Wizard screen by clicking on the corresponding
tab:
Search:
Add:
Remove:
Uncheck
All:
Links to
Selected
Devices:
D-Link Systems, Inc.
Verisign
Click to search for any available cameras
to connect to the network.
Click to manually add a camera to
the network. A window will appear,
prompting you to enter the camera's
IP address or domain name. A second
window will appear, prompting you to
enter the port number.
Click to remove the selected camera(s)
from the network.
Click to uncheck all selected cameras.
Click to view all selected devices on your Internet browser.
Installation Wizard Screen
15