D-Link DCS-6220G User Manual page 43

DCS-660G User's Manual
Configuration > Advanced > Mail & FTP (continued)
1st FTP remote folder:
Primary FTP Passive
2nd FTP server:
2nd FTP server port:
2nd FTP user name:
2nd FTP password:
2nd FTP remote folder:
Secondary FTP Passive
Click Apply
changes effective
Invalid settings may cause the DCS-6620G to not respond. Change the configuration settings only
if necessary. Consult with your network administrator or your Internet Service Provider (ISP) if you
do not have the necessary information. If you cannot connect to the camera, refer to page 13 for
camera reset and restore factory settings procedures.
D-Link Systems, Inc.
Granted folder on the external FTP server. The string must conform to
the external FTP server. Some FTP servers cannot accept a preceding
slash symbol before the path if there is no virtual path mapping. Refer
to the instructions of the external FTP server for details. The folder
privilege must be open for upload.
If the DCS-6620G is located inside a network that is protected by a
firewall, a data connection for FTP may be prohibited. Passive mode
FTP can bypass this rule and allow the uploading of snapshots. If the
Mode:
passive mode is selected, the DCS-6620G can automatically attempt
to upload in active mode if the external FTP server does not support
passive mode.
The domain name or IP address of the external FTP server. Note that
the nd FTP server will only be used if the 1st FTP is unavailable. If
image upload to the 1st FTP is successful, no attempts will be made
to connect to the nd FTP server.
The port to access the backup FTP server.
Granted user name on the backup FTP server.
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
Passive mode setting for the backup FTP server.
Mode:
to make
Using the DCS-660G with an Internet Browser
43