D-Link DCS-6220G User Manual page 106

DCS-660G User's Manual Using IP surveillance Software
Scheduling (continued)
Hour Time-Line
In the figure below, the Hour time-line is displayed.
Marking/Unmarking the Recording Time on the Hour Time-Line
You can apply the one-click function by clicking the left mouse button and dragging to mark the time on
this time-line. The operating method for the hour time-line is the same as that of the week time-lines.
.
Please refer to the previous section about marking/unmarking on the week time-line for more details
Schedule with Time Picker
Begin and End Time
Date picker Hour picker Minute picker
There are three controlling units in both "Begin Time" and "End Time" selectors shown above. The first
unit of these two selectors is the date picker. You can select day with it to set the beginning time and the
ending time for the recording interval.
The second and third units are the hour picker and the minute picker. You can change the hour and minute
settings for the beginning and ending time with them.
Note: The time set in "Begin time" must be earlier than that in "End time". Otherwise the
settings will not be applied.
D-Link Systems, Inc. 106