D-Link DCS-6220G User Manual page 90

DCS-660G User's Manual
Monitor Program (continued)
Using the Monitor Program
This section depicts, in detail, how to manipulate the monitor tool.
Connection of the DCS-6620G
Channel:
Once you have the privilege to connect to the DCS-6620G, the cameras will automatically appear in the
video area in the order they are connected. Once you have set up the camera in the video channel, the
color of the channel number will turn blue, indicating that the camera has been added to IP surveillance.
If you do not set up the camera for the video channel, the color of the channel number will be gray.
There is a unique light signal associated with each channel number. It indicates the status of the dedicated
video channel, which is depicted as follows:




D-Link Systems, Inc.
Off
The video channel is not connected with any DCS-6620G yet.
Green
The green light means the DCS-6620G associated with this channel number is connected,
and the video is monitored in the video area.
Red
The red light indicates the video from this channel is recording into the video database.
In this mode, you don't have to drag and drop the channel to the video area. This means
that this application software supports real-time recording with and without real-time
monitoring for the dedicated video channel.
Blink
With the motion detection mechanism set in the DCS-6620G, the light of the corresponding
channel will blink once the motion event is triggered.
Using IP surveillance Software
90